10mm section

More elegantly, more firmly

DSP has bending technology that can allow several designs.
It can be bent according to construction methods such as 180-degree bending and 10 mm-bending.

DSP Bending technology

DSP’s products

No delamination when bending the 7 mm bonded plate between STS 0.2 and EGI 1.2T.

No delamination when bending 7 mm.

Competitors‘ products

Delamination when bending the 7 mm bonded plate between STS 0.2 and EGI 1.2T.

Delamination even to the 25mm bent part due to the delamination of the 7 mm bent part.